Home  
Map  
CT/CR-7016     Contact Closure (16 Channels)   Front Panel Layout of CT/CR-7016
For Contact Closure or Status Monitoring Applications  

   Typical Aplication of the Contact Closer Monitor


The Luxlink® CT/CR-7016 system consists of the CT-7016 transmitter and CR-7016 receiver. Both units utilize digital encoding techniques to transmit and receive eight separate contact closures over a single optical fiber conductor. For a lower cost single channel version see the CT/CR-7001, or 8 channel CT/CR-7008

The CT-7016 may be activated by dry contacts or TTL signals and the CR-7016 will reproduce these inputs as isolated output contact closures corresponding to the respective input signal. All inputs are transient protected against excessive surges present on the signal and power leads. The unit is completely fail-safe in that a loss of operating power or a broken fiber will force all contacts to the open condition. Integral indicators are provided on both units to continuously indicate the link and contact closures status as well as proper operating power thereby making system troubleshooting simple.
 
Specifications Important Features
Number of Channels  16    · 16 Independent Contacts
    on One Fiber
Transmitter Input  Dry Contact Closure or TTL   · Signal & Power & Link
    Indicators      
Tx Input Impedance  3 K ohms maximum  · Multimode & Single-mode
    versions 
Receiver Output  Isolated Relay Contacts  · Stand-alone, DIN or Rack
    Mountable (same unit)
 
Output Contact Ratings  0.5 A @ 125 VAC (62.5VA)
 1.0 A @ 24 VDC
Output Contact carry current  2.0 A maximum  
Speed of Response  10 ms maximum  
Operating Wavelength 850nm, 1310nm or 1550 nm    
Output Contact Resistance 100 milli-ohms maximum    
Optical Connectors  ST (multimode)
 FCPC (single-mode)		    
Optical Loss Budget  0-10 dB (multimode),
 0-12 dB (single-mode)		    
Signal Connectors  Removable Terminal Block
Power Requirements  11-24 VAC/DC @300mA
MTBF (per MIL HBK   217)  >120,000 Hours
Humidity  <95% non-condensing
Operating Temperature  -35 to +75 degrees C
Physical Size  5.0" x 3.0" x 2.23"
127mm x 76mm x 56.6mm		    

*Note all specifications are subject to change without notice

Copyright 2020

LuxLink

Voice: 1-516-931-2800

Email: Contact Us