The LuxLinkIRGM-2504 is a distribution amplifier (DA) that accepts an electrical
modulated IRIG A
through H, NASA-36 and IEEE 1344 input signal and produces four individual electrical output
signals for distribution over four separate coaxial cables to other IRIG
receivers. If an optical IRIG distribution amplifier is required see
the IRGM-1004
Integral indicators are also provided to continuously
indicate the presence of IRIG signals as well as the presence of operating
power making system troubleshooting simple. Units can be mounted in our 1U,
2U, or 3U rack panels, and may be daisy chained providing multiple outputs
( e.g. 3 units in a 1U rack yields 10 outputs)
Specifications
Important Features
System Bandwidth
100 Hz to 500 KHz
· 4 Buffered
Outputs
Protocols
IRIG A,B,D,E,H,
· Cost effective
Input / Output Impedance
50 ohms
· Signal & Power
Indicators
Input / Output Level
3 volt pp Maximum
·
Stand-alone, DIN or Rack
Mountable (same unit)
Output Drive Current
40 mA per output
Signal/Noise Ratio
60 dB minimum
Linearity and THD
2% typical
Signal Connectors
BNC
Propagation Delay
5 ns
Output Channel Isolation
>40 dB
Offset between outputs
< 0.5 ns
MTBF (MIL-HDBK-217D)
>120,000 Hours
Operating Temperature
-35 to +75 °C
Humidity
<95% non-condensing
Power Requirements
11-24 VAC/DC @350mA
Physical Size
5.0" x 3.0" x 1.0"
127mm x 76mm x 25.4mm
Note all specifications are subject to change without notice
Fiber Optic Communications Systems
